Coming Soon: PEQ-15 Enhanced Narrow Diffuser & Sacrificial Window
Coming Soon: PEQ-15 Enhanced Narrow Diffuser & Sacrificial Window

Coming Soon: PEQ-15 Enhanced Narrow Diffuser & Sacrificial Window

Regular price $89.00
Unit price  per 
Shipping calculated at checkout.

The Enhanced Narrow Diffuser (END) is a ruggedized housing, sacrificial window, and diffuser system that replaces the lackluster diffuser that comes stock with your AN/PEQ-15.

Once installed, simply flip the diffuser in front of the aperture of the illuminator. The END will effectively diffuse the illuminator into a bright 15° (260mrad) flood. For reference-the widest divergence of a PEQ-15 illuminator is approximately 6° (105mrad). This diffuser is also approximately 5X brighter than the stock diffuser the PEQ-15 comes with

The premium diffusive element found in the END is made from a stronger substrate than its predecessor. It also has a wider aperture to allow maximum beam scattering for diffuse illumination.

PROTECTIVE HOUSING & INSTALLATION

The END assembly is composed of two individual pieces:

The Body is the bottom most portion of the END assembly, and is responsible for a secure fit to the Peq-15's illuminator.

The body is also responsible for housing the replaceable sacrificial windows that come with your END Assembly. Any 1/2" x 1/16" window can fit into the provided cavity. 2 sacrificial windows are provided.

Note: A secondary “ghost” image of the illuminator may appear if the user chooses to use a sacrificial window because of the internal reflection of the uncoated material.

To Install, align the two small arrows on the sides of the END Body to the textured grooves on the illuminator. Once the body is placed over the illuminator, two set screws on both sides of the bottom are to be snugged with a 3mm driver.

Do not over-tighten. Only a small amount of torque is needed to affix the body of the END securely to the illuminator. A Vibra-tite VC-3 thread locking packet is included with your END/EFL for use on the set-screws. If you do not adequately apply the VC-3 to your set screws before installation, your device may come loose and become damaged--VOIDING YOUR WARRANTY.

The second piece that makes up the END assembly is the Head. The Head is responsible for housing and protecting the diffusive element. There are two curved channels that run through the Head providing space for a 1" ID x 1-1/8" OD x 1/16" CS O-Ring to sit. The O-ring connects to the bottom two struts on each side on the END body and over the END head where the channels are.

NOTE: Due to the tight tolerances of the Head/Body connection-- to ensure little movement when the optic is flipped-- the user is encouraged to push the Head of the device into the Body to make sure it is fully seated and engaged.

This diffuser has been tested to work on a standard full power Peq-15 with an output power no greater than 45mW. Civilian Atpial-C's will work with the END as well.

THIS DEVICE HAS NOT BEEN TESTED ON HIGHER POWER PEQ DEVICES SUCH AS THE LA5. WE CANNOT GAURANTEE THAT OUR DIFFUSER WILL WITHSTAND NIR LASERS WITH POWERS HIGHER THAN 50mW. TRY AT YOUR OWN RISK OF VOIDED WARRANTY.

Warranty For This Product

Villain Weapon Systems LLC fully warranties your product's housing. Optics (other than diffusers) are NOT warrantied by us. If damage occurs to an optic, a small fee will be requested in order to fully repair (or replace) it.
VWS claims no responsibility for incorrect use of this product on full power devices. VWS claims no responsibility for Injury for use of this product. VWS claims no responsibility for damage of a laser product via external optics. By purchasing this product, you agree to these terms.

NEVER LOOK INTO THE APERTURE OF A LASER PRODUCT

Proudly made in Texas